Home > Managed Switches > M5300 Series: Access
Sort By:
1
Netgear GSM7328FS-200NES
GSM7328FS-200NES Switch L3 Mgd 24 X GB SFP + 4 X Shared 10/100/1000
List Price: $1,962.00
Our Price: $1,509.00
Savings: $453.00

GSM7328FS-200NES Netgear ProSafe Next-Gen Edge Managed Switch M5300-28GF3 Switch - L3 - managed - 24 x Gigabit SFP + 4 x shared 10/100/1000 - desktop
Netgear GSM7328S-200NAS
GSM7328SO-200NAS Switch L3 Mgd 24x10/100/1000 + 4xGB SFP + 2xSFP+
List Price: $2,608.00
Our Price: $2,006.00
Savings: $602.00

GSM7328SO-200NAS NETGEAR ProSAFE GSM7328Sv2 Open-Source Linux version for third-party openflow applications Switch - L3 - managed - 24 x 10/100/1000 + 4 x shared Gigabit SFP + 2 x SFP+ - desktop
Netgear GSM7352SO-200NAS
GSM7352SO-200NAS Switch - L3 - managed - 48 x 10/100/1000 + 4 x shared Gigabit SFP + 2 x SFP+ - desktop
List Price: $4,360.00
Our Price: $3,354.00
Savings: $1,006.00

GSM7352SO-200NAS NETGEAR ProSAFE GSM7352Sv2 Open-Source Linux version for third-party openflow applications Switch - L3 - managed - 48 x 10/100/1000 + 4 x shared Gigabit SFP + 2 x SFP+ - desktop
   
 
1

Key Features and Investment Protection

  • 24 and 48 Gigabit models, and one 24 Gigabit SFP fiber model
  • Because RIP, OSPF, VRRP or PIM aren't always needed, M5300 series comes with port-based / VLAN-based / subnet-based "static routing" only Layer 2+ versions
  • You can save costs now and should new applications arise, there's seamless upgrade path with Layer 3 licenses
  • 4 or 24 uplink fiber (SFP) ports for Fast Ethernet or Gigabit optics
  • Two embedded 10 Gigabit interfaces streamline network uplinks with SFP+ and 10GBase-T (RJ45) combo ports
  • Two supplemental 10 Gigabit I/O bays for additional uplinks or local / remote stacking, provide versatile 10 Gigabit deployment capabilities
  • Uplink capacity per switch is 4-port 10 Gigabit total, mixing 10GBase-T (RJ45), 10GBase-X (SFP+), 10GBase-CX4 (802.3ak) and 48 Gbps stacking ports

PoE+ Features and Expandable Power

  • 380W PoE+ budget built-in per switch and full PoE+ power budget capacity up to 1,440W per switch with external EPS
  • Example: 96-port PoE+ in a 3 rack unit (RU) form factor and 30W power on all ports (2,880W budget) using two units M5300-52G-POE+ and one RPS4000
  • Redundant power supply functionality with one hot-swap modular power supply
  • Optional single switch RPS option (RPS5412, one-to-one protection)
  • Optional four-switch RPS option (RPS4000, providing power backup up to four switches concurrently as for one-to-one mode)
  • Optional four-switch EPS option (RPS4000 in External Power Supply mode for PoE+ application of up to 2,880W PoE+ budget)

Main Software Features

  • All M5300 series versions share the same code base for easier deployment and maintenance; same firmware across all platforms
  • M5300 series is flexible enough for mixed stacking between Layer 2+ and Layer 3 versions
  • Automatic multi-vendor Voice over IP prioritization based on SIP, H323 and SCCP protocol detection
  • Voice VLAN and LLDP-MED for automatic IP phones QoS and VLAN configuration
  • Multi-hop RP multicast PIM routing advanced implementation for resilient video deployments
  • Advanced classifier-based hardware implementation for L2 (MAC), L3 (IP) and L4 (UDP/TCP transport ports) security and prioritization
  • Innovative multi-vendor Auto-iSCSI capabilities for easier virtualization optimization

Virtual Chassis Stacking Technology

  • True Virtual Chassis Stacking technology with up to 384 Gbps interconnect for network operations simplification
  • Meshed stacking for multi-resiliency and advanced load balancing capabilities
  • Up to 384 ports Gigabit and 16 available 10 Gigabit uplink ports per Virtual Chassis of 8 switches
  • Highest availability with sub-second master failover for L2 and L3 seamless switching
  • Distributed Link Aggregation for active-active connections
  • Investment protection: backward stacking capability with previous GSM72xxPS v1h1 and GSM73xxS v2h1 models

Management Features

  • DHCP/BootP innovative auto-installation including firmware and configuration file upload automation
  • Industry standard SNMP, RMON, MIB, LLDP, AAA and sFlow implementation
  • Selectable serial RS232 DB9 and Mini-USB port for management console
  • Standard USB port for local storage, logs, configuration or image files
  • Dual firmware image and configuration file for updates with minimum service interruption
  • Industry standard command line interface (CLI) for IT admins used to other vendors commands and scripting
  • Fully functional Web console (GUI) for IT admins who prefer an easy to use graphical interface

Industry Leading Availability

  • Removable, modular power module for the main power supply
  • Hot-swap RPS / EPS capabilities for 100% uptime when the main power supply is replaced
a